TM-C3500 Label Unwinder with 3" Core Holder TM-C3500/TM-C7500/C6000/C6500/Kiaro

$999.00 $869.00
(You save $130.00)
In stock, ships within one business day
25.00 LBS
Calculated at Checkout

TM-C3500 Label Unwinder with 3" Core Holder for use with Epson TM-C3500, TM-C7500, C6000, C6500 and QuickLabel Kiaro, Thermal Printers

The position of the unwinders tension arm is calibrated as follows:
a) When the printer forwards the media for printing, the tension arm goes up, the device unwinds the media.
b) When the tension arm is in the middle position, the device is idle.
c) When the printer pulls back the media, the tension arm goes down, the device rewinds it.

Core Diameter: 3" Fixed Core Holder
Label Width: 5"
Roll Diamter: Max. 10" outside diameter

An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tension arm, the adjustment of the rotation’s speed and rotation’s direction. A 2A fuse is used as protection.

This Label Unwinder can be used with the following Colour Inkjet label printers:

  • Epson TM-C3400 inkjet colour label printer
  • Epson TM-C3500 inkjet colour label printer
  • Epson TM-C7500, TM-C7500G and TM-C7500GE inkjet colour label printers
  • Epson ColorWorks C6000 and C6500 inkjet colour label printers
  • QuickLabel Kiaro inkjet label printers

This Label Unwinder can also be used with Direct Thermal Label Printers and Thermal Transfer Label Printers, if you want to use larger 10" OD label rolls with 3" cores.